日韓國產午夜一區二區三區_思思久久精品_日本少妇被爽到高潮动态图_无码人妻视频网站红杏_宅男免费看片_高端玩家项思醒14分59秒视频_一级全黄60分钟免费看_91精品国产人成网站_亚洲中文字幕永久在线不卡_曰韩在线黄视频

According to the analysis of voltage small diesel generator, diesel generator caused by voltage instability often occur in two situations, one is the high voltage, a voltage is too low, these two kinds of circumstances will cause voltage instability and can not cause use of diesel generator, diesel generator manufacturers in Weifang introduce these two kinds of situations and solutions for you:

Cause and treatment of over voltage for small diesel generator set:

1. reason: excessive speed. Handling: reduces the opening of the hydrofoil and reduces the speed of the turbine.

2. reason: the gap of shunt reactor core is too large. Handle: change the thickness of reactor core gasket, adjust air gap.

3. reasons: magnetic field rheostat short circuit; voltage regulation failure. Handling: finding short circuit points and eliminating them.

4. reason: generator accident speed. Handling: emergency shutdown for incident handling.

Causes and treatment of low voltage of small diesel generator set:

1, the prime mover speed is too low. Handling: adjust the speed of the prime mover to the rated value.

2 、 the excitation circuit resistance is too large. Processing: reduce the resistance of the magnetic field rheostat to increase the exciting current. For the semiconductor excitation generator, the additional winding shall be checked whether the connector is broken or wrongly connected.

3 、 excitation motor brush is not in neutral position, handle: or spring pressure is too small. Switch the brush to the correct position, change the brush and adjust the spring pressure.

4 、 some rectifier diodes are breakdown. Handling: check and replace the breakdown diode.

5 、 short circuit or ground fault in stator winding or excitation winding. Handling: checking faults and removing them.

6, brush contact surface is too small, lack of pressure, poor contact. Processing: If due to the commutator surface not only can be caused, at low speed, the surface of the commutator polished with emery cloth, or adjust the spring pressure.